The forecast can be calibrated on the display unit for better accuracy when environmental factors or sensor placement impact the accuracy of your data. If no buttons are pressed for 30 seconds, it automatically exits SET MODE.Save your time adjustments, press and release the “SET” button once more to adjust the next item.Adjust the time, press and release the “up” or “down” buttons (press and HOLD to fast adjust).The preference you are currently setting will blink on display. Press the “settings” button at the back of the display unit to enter SET MODE.How to Set Time on the Acurite Weather Station Keep the units a few feet apart of each other for about 5 minutes or until you get a solid sensor signal.Reinstall batteries and power cord into the display unit.Check this guide for proper outdoor temperature sensor or thermometer placement Reinstall the outdoor sensor’s battery.Change the A-B-C switch on both units to match on the same channel.Bring the sensor and display unit together and then power down by removing the power cord and/or at least one battery from each.You use standard alkaline batteries or lithium batteries in the sensor when the temperature is below -4 o.You place the units at least 3 feet away from electronics that could interfere with wireless communication.You relocate the 5-in-1 sensor and/or display unit.You may select A, B or C but both units need to match to sync up. You verify that the A-B-C switch in the battery compartments of the sensor and display are set to the same letter.A Wi-fi status message will appear to confirm your connection to the display.Ĭheck this too: Lacrosse Weather Station How to and Troubleshooting Guide How to Reset Acurite Weather Station.
Enter the name of your wireless network and password.Once connected, open your web browser and type “192.168.4.1” in the address bar and click on enter to access the Acurite Wi-fi display settings website.From your mobile device or computer, connect to the Wi-fi signal of the Acurite display.
Power on the display using the provided power cord.
0 kommentar(er)
